T04e/t04 T3 Ar. 63 300+hp Compressor Turbine+wg Anti-surge Polished Turbo Charger
63 300+HP COMPRESSOR TURBINE+WG ANTI-SURGE POLISHED TURBO CHARGER. This T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing, wheel and center section. A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag.
The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP. They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-5.0L engines up to 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability.
Recommended boost pressures are 7psi. 5 Bar to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi.
Doing so could result in damaging your engine. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Capable of Boosting Horse Power up to 300+ BHP. Minimum Estimated Power Gain: 75 - 100 HP. High Quality Material, Cast Housing with Durable Steel. Standard 2.50 Inner Diameter V-Band. 3.00"/ 2.00". Instructions not included with most of our products. CRC highly recommends professional installation on our performance parts. We are a performance aftermarket car parts company providing a variety of parts for all sorts of makes and models. Shop with us with confidence you would be receiving the best quality products for the value. No matter if it's for a car or truck we have exactly what you're looking for! We are not responsible for incorrect or undeliverable addresses. Not all of our items can be delivered to a P. Expenses of reshipping or rerouting for incorrect or undeliverable addresses would be buyers' responsiblity. Please understand that we have no control over carriers' transit time. And the city of destination. US Territories and Military such as GU, VI, SAIPAN, APO/FPO and Virgin Island are not included in the 48 Contiguous States. The item "T04E/T04 T3 AR. 63 300+HP COMPRESSOR TURBINE+WG ANTI-SURGE POLISHED TURBO CHARGER" is in sale since Friday, December 16, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "charismatic_racing_concepts" and is located in Rowland Heights, California. This item can be shipped worldwide.- Brand: Charismatic Racing Concepts
- Manufacturer Part Number: CRC-TBCT04ETSQP
- Interchange Part Number: CRC-TBCT04ETSQP
- Other Part Number: CRC-TBCT04ETSQP
- Fitment Type: Performance/Custom
- Placement on Vehicle: Front
- Superseded Part Number: CRC-TBCT04ETSQP
- Color: Metallic
- Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
- Surface Finish: Cast
- Intake Inlet/ Outlet: 3.00"/ 2.00"
- Inlet / Outlet Diameter: 3" / 2"
- Compressor A/R: 0.53
- Compressor Inducer /Exducer (MM): 50mm / 76mm
- Compressor Trim: 57
- Exhaust (Downpipe) Flange: Standard T3/ T4 4-Bolt
- Exhaust (Turbo Manifold) Flange: Standard 2.50" Inner Diameter V-Band
- Turbine A/R: 0.63
- Turbine Inducer / Exducer (mm): 66mm / 56mm
- Turbine Trim: 58
- Outlet Type: 2.5" V-band
