T04e/t04 T3/t4 Ar. 63 Anti-surge 300+hp Polished Turbo Charger+wastegate V-band
T3 350+HPs Journal-Bearing Turbo Compressor Boost Kit. 63 ANTI-SURGE 300+HP POLISHED TURBO CHARGER+WASTEGATE V-BAND. This T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing, wheel and center section. A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag. The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP. They are also commonly used in twin turbo applications.
Recommended boost pressures are 7psi. 5 Bar to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan.
Capable of Boosting Horse Power up to 300+ BHP. Minimum Estimated Power Gain: 75 - 100 HP. High Quality Material, Cast Housing with Durable Steel. Standard 2.50 Inner Diameter V-Band. 3.00"/ 2.00".Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window.
DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box.
Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified.
This item is in the category "Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Turbochargers & Parts". The seller is "speed_daddy" and is located in Rowland Heights, California. This item can be shipped worldwide.
- Intake Inlet/ Outlet: 3.00"/ 2.00"
- Interchange Part Number: SDD-TBCT04ETSQP
- Inlet / Outlet Diameter: 3" / 2"
- Fitment Type: Performance/Custom
- Turbine Inducer / Exducer (mm): 66mm / 56mm
- Brand: Speed Daddy
- Surface Finish: Cast
- Manufacturer Part Number: SDD-TBCT04ETSQP
- Turbine A/R: 0.63
- Compressor Inducer /Exducer (MM): 50mm / 76mm
- Exhaust (Turbo Manifold) Flange: Standard 2.50" Inner Diameter V-Band
- Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
- Compressor Trim: 57
- Compressor A/R: 0.53
- Placement on Vehicle: Front, Rear, Left, Right
- Outlet Type: 2.5" V-band
- Superseded Part Number: SDD-TBCT04ETSQP
- Other Part Number: SDD-TBCT04ETSQP
- Turbine Trim: 58