T04e T3/t4.63 A/r Anti-surge 5-bolt Flange Turbo/compressor Bearing Turbocharger

T04e T3/t4.63 A/r Anti-surge 5-bolt Flange Turbo/compressor Bearing Turbocharger

T04e T3/t4.63 A/r Anti-surge 5-bolt Flange Turbo/compressor Bearing Turbocharger

T04e T3/t4.63 A/r Anti-surge 5-bolt Flange Turbo/compressor Bearing Turbocharger    T04e T3/t4.63 A/r Anti-surge 5-bolt Flange Turbo/compressor Bearing Turbocharger

T04E T3/T4.63 A/R ANTI-SURGE 5-BOLT FLANGE TURBO/COMPRESSOR BEARING TURBOCHARGER. This T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing, wheel and center section.
A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag. The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP. They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-5.0L engines up to 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi.

5 Bar to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine.

Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi. Doing so could result in damaging your engine. Boost engine horse power significantly. Increase engine power and torque outpout. Maintain combustion chamber pressure and fuel/air load. Contructed with high quality material. Built for durability and strength. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. We'd love to hear from you! We stand behind the products we sell. Please inspect all your order(s) upon receipt. All return items MUST be in brand new condition which means the item is never installed and kept in the original packaging. All items are brand new unless otherwise stated. PROFESSIONAL installation is highly recommended. The item "T04E T3/T4.63 A/R ANTI-SURGE 5-BOLT FLANGE TURBO/COMPRESSOR BEARING TURBOCHARGER" is in sale since Monday, April 7, 2014. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "dptmotorsport" and is located in Rowland Heights, California.
This item can be shipped worldwide.
  • Brand: DPT Motorsports
  • Manufacturer Part Number: DPT-TBCT04E63SQ
  • Interchange Part Number: DPT-TBCT04E63SQ
  • Other Part Number: DPT-TBCT04E63SQ
  • Placement on Vehicle: Front
  • Fitment Type: Performance/Custom
  • Superseded Part Number: DPT-TBCT04E63SQ
  • Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
  • Surface Finish: Cast
  • Intake Inlet/ Outlet: 4.00" / 2.50"
  • Inlet / Outlet Diameter: 4.00" / 2.50"
  • Compressor A/R: 0.48
  • Compressor Inducer /Exducer (MM): 50.50 / 76.00
  • Compressor Trim: 55
  • Exhaust (Downpipe) Flange: Standard T3 5-Bolt
  • Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt
  • Turbine A/R: 0.63
  • Turbine Inducer / Exducer (mm): 65.50 / 55.90
  • Turbine Trim: 73
  • Horse Power Increment: 300

T04e T3/t4.63 A/r Anti-surge 5-bolt Flange Turbo/compressor Bearing Turbocharger    T04e T3/t4.63 A/r Anti-surge 5-bolt Flange Turbo/compressor Bearing Turbocharger