T04e T3/t4.63ar 55 Trim Antisurge Turbocharger Turbo 500hp+black Blanket Rs
63AR 55 TRIM ANTISURGE TURBOCHARGER TURBO 500HP+BLACK BLANKET RS. Turbocharger: The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations.
A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.
Turbo Blanket: Reduces the amount of radiant heat coming from turbochargers. Helps to lower engine bay temperatures; thus, protects other engine bay components from extreme heat. On the other hand, this turbo blanket serves as a great way to enhance the appearance of turbochagers by covering the turbine, compressor and exhaust housing. High Quality Material, Cast Housing with Durable Steel. Increase Engine Power and Torque Outpout.
Maintain Combustion Chamber Pressure and Fuel/Air Load. Contructed with High Quality Material. Built for Durability and Strength. Inner Material Made with Stainless Steel Knitted Wire Mesh for Strength and Durability.
Surfaced with High Quality Silicone Impregnated Fiber Glass Material for Extra Heat, Wearing, and Corrosion Resistance. Inner Surface Shielded with Calcium Magnesium Silicate Wool. Stainless Steel Lacing Wire Fastening. 2 x Stainless Steel Lacing Wire Fasteners. All necessary isntallation hardware included. Besides Flanges, Please Compare the Trims Provided Above with the Targeted Engine Bay to Decide Fitment. Modification might be Required for Some Vehicles. Professional Installation is Highly Recommended. Installation Instruction is NOT Included.
Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified.
Turbine Inducer / Exducer (mm). 65.50 / 55.90. 4.00" / 2.50". Cast Iron/Steel Turbo Housing/ Aluminum Controller.
50.50 / 76.00. The item "T04E T3/T4.63AR 55 TRIM ANTISURGE TURBOCHARGER TURBO 500HP+BLACK BLANKET RS" is in sale since Monday, October 29, 2018.
This item is in the category "Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Turbochargers & Parts". The seller is "speed_daddy" and is located in Rowland Heights, California.
This item can be shipped worldwide.- Interchange Part Number: SDD-TBCT04E63SQ+TBBKT3BKRS
- Placement on Vehicle: Front, Rear, Left, Right
- Inlet / Outlet Diameter: 4.00" / 2.50"
- Fitment Type: Performance/Custom
- Brand: Speed Daddy
- Turbine Inducer / Exducer (mm): 65.50 / 55.90
- Manufacturer Part Number: SDD-TBCT04E63SQ+TBBKT3BKRS
- Turbine A/R: 0.63
- Compressor Inducer /Exducer (MM): 50.50 / 76.00
- Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt
- Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
- Exhaust (Downpipe) Flange: Standard T3 5-Bolt
- Compressor Trim: 55
- Compressor A/R: 0.48
- Surface Finish: Cast
- Horse Power Increment: 300
- Superseded Part Number: SDD-TBCT04E63SQ+TBBKT3BKRS
- Other Part Number: SDD-TBCT04E63SQ+TBBKT3BKRS
- Turbine Trim: 73
