T70.70 A/r Stage III 500+hp Compressor Turbine Bearing Anti-surge Turbo Charger
Hardware as Shown in the Picture Above. High Compression/ Boosting T70 Anti-Surge Turbocharger : The T70 turbocharger assembly is designed to be used on engines displacing 1.8L-3.0L and is typically good for around 600HP. They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-6.0L engines up to 1200HP.Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi. 5 Bar to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan.
Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi.Doing so could result in damaging your engine. Universal Application on Any T3 Turbo Manifold and 3.25 V-Band Downpipe (Besides Flanges, Please Compare the Trims Provided Above with the Targeted Engine Bay to Decide Fitment) Modification might be Required for Some Vehicles. High Compression/ Boosting T70 Anti-Surge Turbocharger. Capable of Boosting Horse Power up to 500+ BHP.
High Quality Material, Cast Housing with Durable Steel. Instructions not included with most of our products. CRC highly recommends professional installation on our performance parts.We are a performance aftermarket car parts company providing a variety of parts for all sorts of makes and models. Shop with us with confidence you would be receiving the best quality products for the value. No matter if it's for a car or truck we have exactly what you're looking for! We are not responsible for incorrect or undeliverable addresses. Not all of our items can be delivered to a P.
Expenses of reshipping or rerouting for incorrect or undeliverable addresses would be buyers' responsiblity. Please understand that we have no control over carriers' transit time. And the city of destination. US Territories and Military such as GU, VI, SAIPAN, APO/FPO and Virgin Island are not included in the 48 Contiguous States. The item "T70.70 A/R STAGE III 500+HP COMPRESSOR TURBINE BEARING ANTI-SURGE TURBO CHARGER" is in sale since Monday, September 25, 2017.This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "charismatic_racing_concepts" and is located in Rowland Heights, California.
This item can be shipped worldwide.
- Brand: Charismatic Racing Concepts
- Manufacturer Part Number: CRC-TBCT70SQ
- Interchange Part Number: CRC-TBCT70SQ
- Other Part Number: CRC-TBCT70SQ
- Placement on Vehicle: Front
- Fitment Type: Performance/Custom
- Superseded Part Number: CRC-TBCT70SQ
- Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
- Surface Finish: Cast
- Intake Inlet/ Outlet: 4.00"/ 2.50"
- Compressor A/R: 0.7
- Compressor Inducer /Exducer (MM): 56.20 / 72.90
- Compressor Trim: 59
- Exhaust (Downpipe) Flange: Standard 3.25" Outer Diameter V-Band
- Exhaust (Turbo Manifold) Flange: Standard T3 4-Bolt Twin-Scroll
- Turbine A/R: 0.84
- Turbine Inducer / Exducer (mm): 73.90 / 58.30
- Turbine Trim: 62