T70 Anti-surge Bearing T3 4-bolt Flange Turbo/compressor Stage 3 Turbocharger
T70 ANTI-SURGE BEARING T3 4-BOLT FLANGE TURBO/COMPRESSOR STAGE 3 TURBOCHARGER. High Compression/ Boosting T70 Anti-Surge Turbocharger : The T70 turbocharger assembly is designed to be used on engines displacing 1.8L-3.0L and is typically good for around 600HP.
They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-6.0L engines up to 1200HP.
Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi. 5 Bar to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan.
Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi. Doing so could result in damaging your engine. 1 X T70 Anti-Surge Turbocharger.
Hardware as Shown in the Picture Above. High Compression/ Boosting T70 Anti-Surge Turbocharger. Capable of Boosting Horse Power up to 500+ BHP. High Quality Material, Cast Housing with Durable Steel.
Universal Application on Any T3 Turbo Manifold and 3.25 V-Band Downpipe (Besides Flanges, Please Compare the Trims Provided Above with the Targeted Engine Bay to Decide Fitment) Modification might be Required for Some Vehicles. WE HIGHLY RECOMMEND PROFESSIONAL INSTALLATION! Top reputable aftermarket performance retailer providing quality tested products for your cars and trucks. We are committed to providing the best products backed by the best service to ensure you have positive experience with shopping at our store.
Currently we do not accept exchanges. Instruction manuals are NOT included with most of our products unless otherwise stated in product description. For emissions related questions, please check your local jurisdiction for emission specific requirements before purchasing.
The item "T70 ANTI-SURGE BEARING T3 4-BOLT FLANGE TURBO/COMPRESSOR STAGE 3 TURBOCHARGER" is in sale since Thursday, January 4, 2018. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts".
The seller is "newpoint_motor" and is located in Rowland Heights, California. This item can be shipped worldwide.
- Brand: Newpoint Motor
- Manufacturer Part Number: NPM-TBCT70SQ
- Interchange Part Number: NPM-TBCT70SQ
- Other Part Number: NPM-TBCT70SQ
- Fitment Type: Performance/Custom
- Placement on Vehicle: Front
- Superseded Part Number: NPM-TBCT70SQ
- Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
- Surface Finish: Cast
- Intake Inlet/ Outlet: 4.00"/ 2.50"
- Compressor A/R: 0.7
- Compressor Inducer /Exducer (MM): 56.20 / 72.90
- Compressor Trim: 59
- Exhaust (Downpipe) Flange: Standard 3.25" Outer Diameter V-Band
- Exhaust (Turbo Manifold) Flange: Standard T3 4-Bolt Twin-Scroll
- Turbine A/R: 0.84
- Turbine Inducer / Exducer (mm): 73.90 / 58.30
- Turbine Trim: 62
