T70 T3 Flange Anti-surge V-band Engine Turbo Charger Turbocharger Stage 4 A/r. 70
T70 T3 FLANGE ANTI-SURGE V-BAND ENGINE TURBO CHARGER TURBOCHARGER STAGE 4 A/R. High Compression/ Boosting T70 Anti-Surge Turbocharger : The T70 turbocharger assembly is designed to be used on engines displacing 1.8L-3.0L and is typically good for around 600HP. They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-6.0L engines up to 1200HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi. 5 Bar to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi. Doing so could result in damaging your engine. High Compression/ Boosting T70 Anti-Surge Turbocharger. Capable of Boosting Horse Power up to 500+ BHP. High Quality Material, Cast Housing with Durable Steel.
Universal Application on Any T3 Turbo Manifold and 3.25 V-Band Downpipe (Besides Flanges, Please Compare the Trims Provided Above with the Targeted Engine Bay to Decide Fitment) Modification might be Required for Some Vehicles. We'd love to hear from you! We stand behind the products we sell.
Please inspect all your order(s) upon receipt. All return items MUST be in brand new condition which means the item is never installed and kept in the original packaging. All items are brand new unless otherwise stated. PROFESSIONAL installation is highly recommended. The item "T70 T3 FLANGE ANTI-SURGE V-BAND ENGINE TURBO CHARGER TURBOCHARGER STAGE 4 A/R.
- Brand: DPT Motorsports
- Manufacturer Part Number: DPT-TBCT70SQ
- Fitment Type: Performance/Custom
- Interchange Part Number: DPT-TBCT70SQ
- Other Part Number: DPT-TBCT70SQ
- Placement on Vehicle: Front
- Superseded Part Number: DPT-TBCT70SQ
- Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
- Surface Finish: Cast
- Intake Inlet/ Outlet: 4.00"/ 2.50"
- Compressor A/R: 0.7
- Compressor Inducer /Exducer (MM): 56.20 / 72.90
- Compressor Trim: 59
- Exhaust (Downpipe) Flange: Standard 3.25" Outer Diameter V-Band
- Exhaust (Turbo Manifold) Flange: Standard T3 4-Bolt Twin-Scroll
- Turbine A/R: 0.84
- Turbine Inducer / Exducer (mm): 73.90 / 58.30
- Turbine Trim: 62