GT35 GT3582 Universal Turbocharger Turbine 10 AN Oil Drain Return Feed Line Kit
Turbocharger BV39 for Audi A3 1.9 TDI 8P / PA BLS BJB BKC BXE 54399700011. 11657790308 Turbocharger Cartridge Chra for BMW 530 d (E60 / E61) M57N 160 Kw. GT35 GT3582 Universal Turbocharger Turbine 10 AN Oil Drain Return Feed Line Kit. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. GT35 GT3582 Universal Turbocharger for 3.0L-6.0L Engine Water-Oil Cooler+Oil Drain Return Feed Line Kit.
Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil Wastegate:External Wastegate. Oil return line length: 550mm.
Oil return line inner diameter: ¢21. Oil feed line length: 1000mm. Oil feed line inner diameter: ¢14. Hose end fitting: 10 AN.Material: High Strength Steel with Aluminum Material. Quantity: Comes with gasket, screws, etc. Exactly the same as shown in the picture. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2.
Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately.Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Professional installation is highly recommended No Instruction Included.
This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please check the specifications and verify compatibility prior to placing your order. Will this fit my car?When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty?
- Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- bearing type: journal bearing, wet bearing
- Brand: BFO
- Classic Car Part: Yes
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Compressor housing A/R: 0.7 A/R
- Cooling Type: Water & Oil cooled
- Dimensions (Length Width Height): 230*180*240 mm
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet Flange: 4 bolt
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Important Notice: Package Included: Just like the picture, Professional installation required
- Manufacturer Part Number: 45WDE0
- Manufacturer Warranty: 2 Years
- Maximum PSI: 22
- Note: No Instruction Included
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Oil lines: Oil return line length: 550mm, Oil return line inner diameter: ¢21, Oil feed line length: 1000mm, Oil feed line inner diameter: ¢14, Hose end fitting: 10 AN
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582,Universal, GT3582R anti-surge anti surge, turbo charger turbolader,Oil Fuel Drain Return Feed Line, turbocompressor turbocharger, & Oil Cooler+Oil Drain Return Feed Line Kit
- shipping time to UK notice: 2-4 b. from UK
- Superseded Part Number: Universal for all 4/6 cylinder and 3.0L-6.0L engines
- Turbine Housing A/R: 0.63 A/R
- Type: Turbocharger
- Universal Fitment: Yes
- Warranty: 2 Year