Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45    Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45.

Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Turbo Turbocharger & Exhaust Manifold Kit For Nissan Patrol 4.2L TD42 GQ Y60. Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model.

Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power. For Nissan Safari / Patrol 4.2L TD42 TB42, TB45, TD45.

Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet (Downpipe) Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil WastegateExternal Wastegate. IncludeTurbo Turbocharger & Exhaust Manifold Kit same as picture.

Mount Type: top mount / high mount. You can plate it off if intending to use internally wastegated Turbo (The blocking plate is included as shown in the picture). Turbine housing Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine WheelMade from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor wheel/bladesCast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3. High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4. Durable: Water-cooled/oil-cooled structure extends turbine service life 5. 100% BALANCING TESTThis Turbocharger you will receive has been balanced using the VSR machine technology. Rich Experience In Turbo Production And Own Factory 2. High-Speed Oil Seal Ring 5. Improve Emissions & Save Oil. We highly recommend you make sure the points below before installing: 1.
Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil.
To protect the turbochager and your car engine, Air filter is necessary. Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. This Turbo is not vehicle specific.
It is compatible with a wide range of applications therefore Please check the specifications and verify compatibility prior to placing your order. Other items you might also like. Turbocharger Cartridge Core for Opel Vauxhall Astra H 1.7 CDTI Z17DTH 4913106007. Turbo charger for Ford TRANSIT RWD 74KW/92KW/99KW/114KW 2.2 TDCI 2011.
Turbocharger CHRA Cartridge Core for BMW 530d E39 730d E38 2.9D GT2556V 454191. TurboCharger for VW Golf GTI Beetle 1.8T K03-053 turbo 53039700053 06A145713L. Turbo for Mazda 3 6 CX-7 MPS MZR 2.3 Petrol K0422-882 260hp Turbocharger Exhaust. Turbocharger Chra Core Cartridge for Hyundai Gets 1.5 CRDI U1.5L Euro 3 05-09.
Turbocharger for RENAULT 1989- B110 MESSENGER 2.5 D 103hp 53149887004 98481610. Turbo Turbocharger CHRA Cartridge for VW T5 Transporter 2.5 TDI AXD 2002 -on new. RHF4 TurboCharger for Mercedes 2.2L Sprinter Vito A6460960199 A6460960699 turbo.
S300SX3 Turbo Turbocharger T4 Twin Scroll 0.91 A/R 320-800hp V-Band Universal. Will this fit my car? When will my order be dispatched? What do I do if I have not received my order? Please make sure you have read through the whole listing and paid attention to note and notice.
Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details.
The message response might be delayed on Weekend, but we promise a response within 12 hours. Opening Hours:7 x 24. The item "Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45" is in sale since Tuesday, November 9, 2021.
This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "carsloyalpartner" and is located in Dorsey. This item can be shipped worldwide.
  • shipping time to UK notice: 2-4 b. from UK
  • Brand: maXpeedingrods
  • Type: High performance aftremarket parts
  • Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582
  • Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
  • Application: GT35 GT3582 Turbo Turbocharger
  • Warranty: 2 Year
  • Cooling Type: Water & Oil cooled
  • Horse Power: Capable of Boosting Horse Power up to 600HP
  • Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
  • Exhaust Outlet (Downpipe) Flange: 4 bolt
  • Compressor housing A/R: 0.7 A/R
  • Turbine Housing A/R: 0.63 A/R
  • Compressor Air Inlet: 4 inch (103.5mm)
  • Compressor Air Outlet: 2.5 inch (63.6mm)
  • Dimensions (Length Width Height): 230*180*240 mm
  • bearing type: journal bearing, wet bearing
  • Note: No Instruction Included
  • Important Notice: Package Included: Just like the picture
  • Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain
  • Maximum PSI: 22
  • Manufacturer Part Number: IN2ZCK

Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45    Turbo manifold Kit GT35 GT3582 T3 a/r. 63 for Nissan Safari TD42 TB42 TD45 TB45