Turbo Turbocharger + Exhaust Manifold Kit For Nissan Patrol 4.2L TD42 GQ Y60 new

  

Turbo Turbocharger + Exhaust Manifold Kit For Nissan Patrol 4.2L TD42 GQ Y60 new. Turbo Turbocharger & Exhaust Manifold Kit For Nissan Patrol 4.2L TD42 GQ Y60. For Nissan Safari / Patrol 4.2L TD42 TB42, TB45, TD45.

Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil Wastegate: W/O Wastegate. Include:Turbo Turbocharger & Exhaust Manifold Kit (same as picture). Mount Type: top mount / high mount. You can plate it off if intending to use internally wastegated Turbo (The blocking plate is included as shown in the picture). Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3.

Compressor housing: ZL104 aluminum 4. Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3.

High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4. Durable: Water-cooled/oil-cooled structure extends turbine service life 5. 100% BALANCING TEST:This Turbocharger you will receive has been balanced using the VSR machine technology. Rich Experience In Turbo Production And Own Factory 2.

Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. To protect the turbochager and your car engine, Air filter is necessary. Professional installation is highly recommended This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please check the specifications and verify compatibility prior to placing your order. Will this fit my car? Please make sure you have read through the whole listing and paid attention to "note" and "notice". When will my order be dispatched?

What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty?

It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE.

Titanizing 4340 H-Beam Racing Conrods for Opel Speedster 2.0L Turbo 20SEH C20LET. KP35 Turbocharger fit Fiat Lancia Vauxhall 1.3CDTI 2010- 54359700005 Turbo. BV43-109 turbo for Audi A4 2.0 TDI B7 170ps 03G145702HX exhaust turbocharger.

Turbo CHRA CORE for Alfa-Romeo Fiat Lancia Opel Grande Punto 1.3 JTD MultiJet. GT2052LS Turbo for Rover 75 MG R75 ZT 1.8L Turbocharger (2002-) 765472 731320.