Anti-Surge compressor turbo GT35 GT3582 journal bearing T3 T4 Turbocharger
Perfect for all 4/6 cylinder and 2.5L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP WARNNING Lacking of oil will casue turbocharger shaft play and damage , please adjust your oil presure and make sure turbochager is fully lubricated. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet (Downpipe) Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Compress Inlet Size(Air intake): 4 inch (103.5mm) Compressor Outlet Size: 2.5 inch (63.6mm) Bearing Type: Wet Float Cooling Type: Water + Oil WastegateExternal Wastegate Oil feed/inlet: M107/16-24 Oil drian/outlet: 2M81.25 water inlet/outlet: M14 1.5 Maximum PSI22 Pakage Weight: 8350g Pakage Size: 262523 cm. Turbine housing Ductile iron qt450-10- temperature resistant up to 700 2. Steel turbine wheelK418 alloy - high oxidation stability and resistance up to 900 3. Compressor housingZl104 aluminum with lightweight 4. Compressor wheelCast aluminium blades superior air tightness & corrosion resistance Product Performance 1. Cost-effective turbo increase 20-40% power for your car 2. Rich experience in turbo production and own factory 3. High-speed oil seal ring 5. Improve emissions & save oil 7. Built for durability and strength All necessary gaskets included for ease of installation. Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating. Ensure exhaust outlet are well sealed by welding. Professional installation is highly recommended (No Instruction Included).
This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e.
Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. 100% balancing Test by TURBOTECHNICS VSR3 This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability. G3-min-Flow VNT Turbo testing The G3-min-Flow (Air) machine can accurately measure the flow through the VGT turbo and verify that it is set to the OEM factory setting. Easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop.
Advanced Actuator Tester/Programmer Electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators and also allows to modify operation range of the actuator arm, that includes changing open and close positions of the working angle. No any proprietary rights, affiliate and sponsorship with the third party marks. Cost effective turbocharger give your car 20-40% power than a non-turbo car of the same year, make and model. Ductile Iron QT450-10, the material used for the exhaust housing, is temperature resistant up to 700. K418 Alloy, the material used for the exhaust impeller, has high oxidation resistance & stability (resistance up to 900). The cast aluminium blades are great airtight seal, airflow, light weight, and corrosion resistant. The item "Anti-Surge compressor turbo GT35 GT3582 journal bearing T3 T4 Turbocharger" is in sale since Monday, May 17, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "maxpeedingrodsgb" and is located in Dorsey. This item can be shipped worldwide.
- shipping time to UK notice: 2-4 b. from UK
- Brand: maXpeedingrods
- Manufacturer Part Number: U4AQ6Y
- Type: Turbocharger
- Features: Individual
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582
- Manufacturer Warranty: 2 Years
- Universal Fitment: Yes
- Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- Warranty: 2 Year
- Cooling Type: Water & Oil cooled
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet (Downpipe) Flange: 4 bolt
- Compressor housing A/R: 0.7 A/R
- Turbine Housing A/R: 0.63 A/R
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Dimensions (Length Width Height): 230*180*240 mm
- bearing type: journal bearing, wet bearing
- Note: No Instruction Included
- Important Notice: Package Included: Just like the picture
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain
- Maximum PSI: 22