GT3071 Billet Turbocharger universal application 2.0-2.5L engine up to 690hp
GT3071 Billet Turbocharger universal application 2.0-2.5L engine up to 690hp. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Universal for 2.5-3.0L Engines. Exhaust inlet outlet flange Type: V-Band Compressor housing: Anti-surge Thrust Bearing: 270 degree Cooling Type: Water + oil cooled Bearing Type: Floating Type Horse power: Up to 500hp Pressure Control: Handle up to 3.0 Bar(43.5psi). Compressor Inducer Diameter: 51.6mm Compressor Exducer Diameter: 71mm Compressor Trim: 52.8 Compressor A/R:0.63. Turbine Inducer Diameter: 61mm Turbine Exducer Diameter: 54.8mm Turbine Trim: 80.7 Turbine A/R:0.82. Oil feed/inlet: M1016/7-24 Oil drian/outlet: M81.25/37.8 Water inlet/outlet: M14 1.5. Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Package Size:26x 24 x 33 cm Package Weight: 7180g.
Turbine housing: Stainless steel turbine housing - temperature resistant up to 1020? Steel Turbine Wheel: K419 alloy - high oxidation stability and resistance up to 1000? Compressor housing: ZL104 aluminum with lightweight 4.Billet Compressor Wheel: Forged CNC full-machined billet aluminum compressor wheel provides a larger horsepower range and maximum boost response. Excellent high temperature resistance, high efficiency and durability 3. Rich experience in turbo production and own factory 4. High-Speed oil seal ring and Precision clearance. 100% balancing Test by TURBOTECHNICS VSR3 2.
G3-min-Flow VNT Turbo testing 3. Make sure the oil drain line is lower than the turbo itself.Gasoline car must install a water cooling device to avoid overheating. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Other items you might also like. Turbo Chra for FIAT STILO 1.9 JTDM 126 136 140 for LANCIA LYBRA 1.9 JTD 716665. Turbo for Mercedes Sprinter mk 1 turbo 311CDI 2.2L 109hp 2004 2005 + gaskets. Coilovers Suspension Shocks Struts Spring For Honda Accord VII MK7 Coupe CM7 CM8. Turbo Charger for VW Jetta 1.8T 1999- K03 Turbocharger w/ pipe boost controller. Turbocharger for TOYOTA 2.5L 2001 2KD FTV HILUX VIGO HIACE turbo turbolader. Turbo Turbocharger for Ford Ranger Double Cab 2.5L WL84 / WL85 / WL85A / VJ33. Turbocharger Billet Turbo For Mini Cooper S R55 R56 R57 1.6 L 11657647003. Billet 724930 Turbocharger for Audi A3 VW Seat Skoda 140BHP 136BHP 2.0 TDI. Will this fit my car?
When will my order be dispatched? What do I do if I have not received my order? Please make sure you have read through the whole listing and paid attention to "note" and "notice".Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. The message response might be delayed on Weekend, but we promise a response within 12 hours. Opening Hours:7 x 24. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "carsloyalpartner" and is located in this country: GB. This item can be shipped worldwide.
- Application: Universal for 2.5-3.0L Engines
- Brand: maXpeedingrods
- Compressor data:: Inducer Diameter: 51.6mm, Exducer Diameter: 71mm, Trim:52.8, A/R:0.63
- Cooling Type: Water and Oil cooled
- Flange Type: V-Band flange of the exhaust side
- Horsepower: Up to 500hp
- Manufacturer Part Number: J6F158
- Manufacturer Warranty: 2 Years
- Notice: NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Notice:: no banjo bolt and oil restrictor,, it need oil restrictor with 2.5-3MM oil holes
- Pressure Control:: up to 3.0 Bar
- Reference OE/OEM Number: GT30 GT3071 Turbolader, Anti-surge Compressor housing, universal racing turbocharger turbo,, Billet Compressor Wheel
- Turbine data:: Turbine Wheel Inducer Diameter: 61mm, Turbine Wheel Exducer Diameter: 54.8mm, Turbine Trim: 81 ; Turbine A/R: 0.82
- Type: Turbocharger
- Universal Fitment: Yes