GT3582 GT35 Universal Turbocharger for all 4/6 cylinder 2.5L-6.0L up to 600HP
Turbo Cartridge Core For Fiat Ducato Ii 2.0 Jtd -84hp Dw10td 2001-06 9632406680. Turbo for Opel Astra H Corsa D Z13DTH 1.3L 66KW / 90PS turbocharger 54359900015. GT3582 GT35 Universal Turbocharger for all 4/6 cylinder 2.5L-6.0L up to 600HP.
Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Are you trying to put together a cost effective turbocharger system for your vehicle?Turbine Side: Exhaust Inlet Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Side: Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Compress Inlet Size(Air intake): 4 inch (103.5mm) Compressor Outlet Size: 2.5 inch (63.6mm). Bearing Type: Floating/Journal Bearing Thrust bearing: 270 degree Cooling Type: Water + Oil Cooling Horse Power: Up to 600HP Turbo Type: Individual Wastegate:External Wastegate Oil feed/inlet: M107/16-24 Oil drian/outlet: 2M81.25 Water inlet/outlet: M14 1.5 Maximum PSI: 22 Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Pakage Size: 26 x 25 x 23 cm Pakage Weight: 8350g. 1 xTurbocharger 2 x Flange gaskets 2 x Oil feed/drain gaskets. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3.
Compressor housing: ZL104 aluminum with lightweight 4. Compressor wheel/blades: Cast aluminium blades - superior air tightness & corrosion resistance. Cost-effective turbo increase 20-40% power for your car 2. Rich experience in turbo production and own factory 3.
High-Speed oil seal ring and Precision clearance 4. Built for durability and strength. 100% balancing Test by TURBOTECHNICS VSR3 2. G3-min-Flow VNT Turbo testing 3. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately.Turbo for Ford Ranger Double Mazda B2500 2.5L VJ33 WL84 VB430013 Turbocharger. Turbocharger for BMW 120d 320d 520d 2.0L 177PS 130KW 2007 2008 2009 2010. Turbocharger 756867 For Volkswagen Eos Golf Jetta mk5 2.0 TDI 140 hp 103kw BMP.
- Application: Perfect for all 4/6 cylinder and 2.5L-6.0L engines
- bearing type: journal bearing, wet bearing
- Brand: maXpeedingrods
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Compressor housing A/R: 0.7 A/R
- Cooling Type: Water & Oil cooled
- Dimensions (Length Width Height): 230*180*240 mm
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet Flange: 4 bolt
- Features: Individual
- Finish: Matte
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Interchange Part Number: for all 4/6 cyl ,2.5L-6.0L engines
- Manufacturer Part Number: LB9SET
- Manufacturer Warranty: 2 Years
- Maximum PSI: 22
- Note: No Instruction Included
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Reference OE/OEM Number: GT35 gt3582, GT3582 anti-surge anti surge Turbine, turbo charger turbolader, turbocompressor turbocharger, High performance aftremarket parts, GT35 GT3582 Turbo Turbocharger
- Superseded Part Number: GT3582
- Turbine Housing A/R: 0.63 A/R
- Type: Turbocharger
- Universal Fitment: Yes
- Warranty: 2 Year
