GT3582 T3 4-Bolt up to 600HP Anti Surge Turbocharger Turbolader + Gaskets
GT3582 T3 4-Bolt up to 600HP Anti Surge Turbocharger Turbolader + Gaskets. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power.
1 xTurbocharger 2 x Flange gaskets 2 x Oil feed/drain gaskets. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2.Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor housing: ZL104 aluminum 4. Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Turbine housing : Ductile iron QT450-10 - temperature resistant up to 700? Steel turbine wheel: K418 alloy - high oxidation stability and resistance up to 900? Compressor housing: ZL104 aluminum with lightweight 4. Compressor wheel/blades: Cast aluminium blades - superior air tightness & corrosion resistance. Cost-effective turbo increase 20-40% power for your car 2.
Rich experience in turbo production and own factory 3. High-Speed oil seal ring and Precision clearance 4.Built for durability and strength. 100% balancing Test by TURBOTECHNICS VSR3 2. G3-min-Flow VNT Turbo testing 3. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage.
Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating.Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific.
Will this fit my car? When will my order be dispatched?What do I do if I have not received my order? Please make sure you have read through the whole listing and paid attention to "note" and "notice". Can I amend my order? What do I do if my product is faulty?
It will speed up the process if you could provide us some pictures or video to illustrate the issue details. The message response might be delayed on Weekend, but we promise a response within 12 hours.Opening Hours:7 x 24. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "carsloyalpartner" and is located in this country: GB. This item can be shipped worldwide.
- Application: Perfect for all 4/6 cylinder and 2.5L-6.0L engines
- bearing type: journal bearing, wet bearing
- Brand: maXpeedingrods
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Compressor housing A/R: 0.7 A/R
- Cooling Type: Water & Oil cooled
- Dimensions (Length Width Height): 230*180*240 mm
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet Flange: 4 bolt
- Features: Individual
- Finish: Matte
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Important Notice: Package Included: Just like the picture, Professional installation required
- Interchange Part Number: for all 4/6 cyl ,2.5L-6.0L engines
- Manufacturer Part Number: B7X0J1
- Manufacturer Warranty: 2 Years
- Maximum PSI: 22
- Note: No Instruction Included
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Reference OE/OEM Number: GT35 gt3582, GT3582 anti-surge anti surge Turbine, turbo charger turbolader, turbocompressor turbocharger, High performance aftremarket parts, GT35 GT3582 Turbo Turbocharger
- shipping time to UK notice: 2-4 b. from UK
- Superseded Part Number: GT3582
- Turbine Housing A/R: 0.63 A/R
- Type: Turbocharger
- Universal Fitment: Yes
- Warranty: 2 Year