GT35 GT3582 Universal Turbocharger Turbine 10 AN Oil Drain Return Feed Line Kit
GT35 GT3582 Universal Turbocharger Turbine 10 AN Oil Drain Return Feed Line Kit. GT35 GT3582 Universal Turbocharger for 3.0L-6.0L Engine Water-Oil Cooler+Oil Drain Return Feed Line Kit. Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet (Downpipe) Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil WastegateExternal Wastegate. Oil return line length: 550mm. Oil return line inner diameter: ¢21.
Oil feed line length: 1000mm. Oil feed line inner diameter: ¢14. Hose end fitting: 10 AN.Material: High Strength Steel with Aluminum Material. Quantity: Comes with gasket, screws, etc.
Exactly the same as shown in the picture. Turbine housing Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2.Steel Turbine WheelMade from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor wheel/bladesCast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3. High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4.
After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil.Professional installation is highly recommended (No Instruction Included) This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please review the specifications and verify compatibility prior to placing your order.
- Brand: maXpeedingrods
- Manufacturer Part Number: 2O6JFQ
- Type: Turbocharger
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582,Universal
- Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- shipping time to UK notice: 2-4 b. from UK
- Application: GT35 GT3582 Turbo Turbocharger
- Warranty: 2 Year
- Cooling Type: Water & Oil cooled
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet (Downpipe) Flange: 4 bolt
- Compressor housing A/R: 0.7 A/R
- Turbine Housing A/R: 0.63 A/R
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Dimensions (Length Width Height): 230*180*240 mm
- bearing type: journal bearing, wet bearing
- Note: No Instruction Included
- Important Notice: Package Included: Just like the picture
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain
- Maximum PSI: 22
- Oil lines: Oil return line length: 550mm