GT35 GT3582 Universal Turbocharger Turbine 10 AN Oil Drain Return Feed Line Kit
GT35 GT3582 Universal Turbocharger Turbine 10 AN Oil Drain Return Feed Line Kit. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. GT35 GT3582 Universal Turbocharger for 3.0L-6.0L Engine Water-Oil Cooler+Oil Drain Return Feed Line Kit. Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil Wastegate:External Wastegate. Oil return line length: 550mm. Oil return line inner diameter: ¢21. Oil feed line length: 1000mm. Oil feed line inner diameter: ¢14. Hose end fitting: 10 AN. Material: High Strength Steel with Aluminum Material. Quantity: Comes with gasket, screws, etc. Exactly the same as shown in the picture. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor housing: ZL104 aluminum 4. Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3. High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4. Durable: Water-cooled/oil-cooled structure extends turbine service life 5. 100% BALANCING TEST:This Turbocharger you will receive has been balanced using the VSR machine technology. Rich Experience In Turbo Production And Own Factory 2. High-Speed Oil Seal Ring 5. Improve Emissions & Save Oil. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Professional installation is highly recommended No Instruction Included. This Turbo is not vehicle specific.
It is compatible with a wide range of applications therefore Please check the specifications and verify compatibility prior to placing your order. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively.
Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
Then, the updated result will be informed. Will this fit my car? Please make sure you have read through the whole listing and paid attention to "note" and "notice".When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Universal T04E T3 flange A/R.
This item can be shipped to all countries in Europe.
- Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- bearing type: journal bearing, wet bearing
- Brand: BFO
- Classic Car Part: Yes
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Compressor housing A/R: 0.7 A/R
- Cooling Type: Water & Oil cooled
- Dimensions (Length Width Height): 230*180*240 mm
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet Flange: 4 bolt
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Important Notice: Package Included: Just like the picture, Professional installation required
- Manufacturer Part Number: G16I2H
- Manufacturer Warranty: 2 Years
- Maximum PSI: 22
- Note: No Instruction Included
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Oil lines: Oil return line length: 550mm, Oil return line inner diameter: ¢21, Oil feed line length: 1000mm, Oil feed line inner diameter: ¢14, Hose end fitting: 10 AN
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582,Universal, GT3582R anti-surge anti surge, turbo charger turbolader,Oil Fuel Drain Return Feed Line, turbocompressor turbocharger, & Oil Cooler+Oil Drain Return Feed Line Kit
- shipping time to UK notice: 2-4 b. from UK
- Superseded Part Number: Universal for all 4/6 cylinder and 3.0L-6.0L engines
- Turbine Housing A/R: 0.63 A/R
- Type: Turbocharger
- Universal Fitment: Yes
- Warranty: 2 Year