GT35 GT3582R T3 a/r. 63 turbine a/r. 70 Anti-Surge turbo Turbocharger Turbolader
70 Anti-Surge turbo Turbocharger Turbolader. Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power.
Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet (Downpipe) Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil WastegateExternal Wastegate.
Turbine housing Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine WheelMade from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor wheel/bladesCast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3.
High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4. Durable: Water-cooled/oil-cooled structure extends turbine service life 5. 100% BALANCING TESTThis Turbocharger you will receive has been balanced using the VSR machine technology.
Rich Experience In Turbo Production And Own Factory 2. High-Speed Oil Seal Ring 5. Improve Emissions & Save Oil. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage.
Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Professional installation is highly recommended (No Instruction Included) This Turbo is not vehicle specific.
It is compatible with a wide range of applications therefore Please check the specifications and verify compatibility prior to placing your order. Other items you might also like.
T04E upgraded V-band flange Universal 5 bolts exhaust outlet 0.63 AR T3 T4 turbo. Will this fit my car?
Please make sure you have read through the whole listing and paid attention to note and notice. When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. The item "GT35 GT3582R T3 a/r. 70 Anti-Surge turbo Turbocharger Turbolader" is in sale since Tuesday, April 27, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Turbochargers & Parts". The seller is "wonderfulcarspace" and is located in Walsall.
Type: High performance aftremarket parts
Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582
Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
Application: GT35 GT3582 Turbo Turbocharger
Warranty: 2 Year
Cooling Type: Water & Oil cooled
Horse Power: Capable of Boosting Horse Power up to 600HP
Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
Exhaust Outlet (Downpipe) Flange: 4 bolt
Compressor housing A/R: 0.7 A/R
Turbine Housing A/R: 0.63 A/R
Compressor Air Inlet: 4 inch (103.5mm)
Compressor Air Outlet: 2.5 inch (63.6mm)
Dimensions (Length Width Height): 230*180*240 mm
bearing type: journal bearing, wet bearing
Note: No Instruction Included
Important Notice: Package Included: Just like the picture
Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain
Maximum PSI: 22
Manufacturer Part Number: FKHPDQ
This item can be shipped worldwide.
- shipping time to UK notice: 2-4 b.