T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line   T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line

T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line. GT35 GT3582 Universal Turbocharger for 3.0L-6.0L Engine Water-Oil Cooler+Oil Drain Return Feed Line Kit. \Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil Wastegate:External Wastegate. Turbo Oil Return / Feeding Line Kit. Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, and gives a best cooling performance on your turbo and long lasting life. Turbo Oil returen /Feeding line kit: Stainless Steel Braided Includes complete install kit It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look gives a best cooling performance on your turbo and long lasting life. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor housing: ZL104 aluminum 4. Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3. High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4. Durable: Water-cooled/oil-cooled structure extends turbine service life 5. 100% BALANCING TEST:This Turbocharger you will receive has been balanced using the VSR machine technology. Rich Experience In Turbo Production And Own Factory 2. High-Speed Oil Seal Ring 5. Improve Emissions & Save Oil. We highly recommend you make sure the points below before installing: 1.

Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Make sure the oil drain line is lower than the turbo itself.

Gasoline car must install a water cooling device to avoid overheating. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.

Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Other items you might also like.

Turbocharger CHRA Cartridge for Renault Megane 1.5 dCi 78 KW Turbo Core Center. RHF5 VJ26 VJ33 WL84 Turbo Core for Ford Ranger Mazda MPV B2500 2.5L Cartridge.

Turbocharger Turbo CHRA Cartridge GT1749V 750431 for BMW 320d E46 110kw/150hp. Turbocharger For Ford Transit DI 1999 2.5L Diesel Turbo 53049700001 Turbolader. K04 turbo for VW Golf 4 1.8T 2000 1998 1999 2001 2002 AQA AUQ AGU 400HP+. T3 T4 V-band Turbo Turbocharger & Oil Drain Return Feed Line Kits Universal. Turbocharger for Mitsubishi Turbo Pajero II Shogun L200 Delica 2.8L 4M40 98-00.

K03S Turbo Charger for Audi A4 A6 VW Passat 1.8T 1997 - 1999 058145703L. GT3037R GT3076R Upgraded Billet turbo Charger Anti-surge for 2.0L-3.0L V-Band. Will this fit my car? Please make sure you have read through the whole listing and paid attention to "note" and "notice". When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "fastautogroup" and is located in this country: GB. This item can be shipped to United Kingdom.

  • Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
  • bearing type: journal bearing, wet bearing
  • Brand: maXpeedingrods
  • Compressor Air Inlet: 4 inch (103.5mm)
  • Compressor Air Outlet: 2.5 inch (63.6mm)
  • Compressor housing A/R: 0.7 A/R
  • Cooling Type: Water & Oil cooled
  • Dimensions (Length Width Height): 230*180*240 mm
  • Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
  • Exhaust Outlet Flange: 4 bolt
  • Horse Power: Capable of Boosting Horse Power up to 600HP
  • Interchange Part Number: GT3582 Turbocharger
  • Manufacturer Part Number: HFAQKS
  • Manufacturer Warranty: 2 Years
  • Maximum PSI: 22
  • Notice: @#@#It's aftermarket replcement part
  • Reference OE/OEM Number: GT35 Turbo, gt3582 , Universal, anti-surge , anti surge, turbo charger, turbolader, Oil Fuel Drain Return Feed Line, turbocompressor , turbocharger, Water + Oil Cooler, Oil Return , Feeding Line
  • Turbine Housing A/R: 0.63 A/R
  • Type: Turbocharger
  • Universal Fitment: Yes


T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line   T3 Flange GT35 GT3582 Universal A/R. 70 Turbo Turbocharger+Oil Feed &Return Line