T3 GT3582 GT35 A/R 0.63 0.7 Anti Surge 4 Water+Oil Cold Turbo Billet Wheel
Perfect for all 4/6 cylinder and 2.5L-6.0L engines Capable of Boosting Horse Power up to 600HP Notice:Please confirm that there is enough space in your car to install this turbo before purchasing. Turbine Side: Exhaust Inlet Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Side: Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Compress Inlet Size(Air intake): 4 inch (103.5mm) Compressor Outlet Size: 2.5 inch (63.6mm) Bearing Type: Wet Float Thrust bearing: 270 degree Cooling Type: Water + Oil Cooling Horse Power: Up to 600HP Turbo Type: Individual Universal Fitment: Yes Finish:Matte Wastegate:External Wastegate Oil feed/inlet: M107/16-24 Oil drian/outlet: 2M81.25 Water inlet/outlet: M14 1.5 Maximum PSI: 22 Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Pakage Size: 26 x 25 x 23 cm Pakage Weight: 8350g. 1xTurbocharger 2xFlange gaskets 4xOil/Water port gaskets 1xBolt 2xWashers 1xManual 1xBrochure 1xSticker.
Turbine housing :Silicon-Molybdenum - temperature resistant up to 850? Steel Turbine Wheel:K419 alloy - high oxidation stability and resistance up to 1000?
Compressor housing:ZL104 aluminum with lightweight 4. Billet compressor wheel:forged full-machined billet aluminum compressor wheels with a larger horsepower range and better boost response Product Performance 1. Increase 20-40% power for your car 2.
Excellent high temperature resistance, high efficiency and durability 3. Rich experience in turbo production and own factory 4. High-Speed oil seal ring and Precision clearance Technology Advantage: 1. 100% balancing Test by TURBOTECHNICS VSR3 2.
G3-min-Flow VNT Turbo testing 3. Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating.
Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. No any proprietary rights, affiliate and sponsorship with the third party marks. Silicon-Molybdenum turbine housing with high-temperature resistance up to 850? Imported floating bearing structure and precise dynamic balance. Turbine Wheel uses the special K419 alloy to achieve stability under high temperatures up to 1000? Aluminum blades with precision machining forging. The lightweight design enables reduced noise and increased response without compromising comfort or longevity. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "maxpeedingrodsgb" and is located in this country: HK. This item can be shipped worldwide.
- Application: for all 4/6 cylinder and 2.5L-6.0L engines
- bearing type: journal bearing, wet bearing
- Billet ompressor wheel: forged full-machined billet aluminum compressor wheels, with a larger horsepower range and better boost response
- Brand: MaXpeedingrods
- Compressor Exducer Diameter: 81.5
- Compressor housing: ZL104 aluminum with lightweight
- Compressor housing A/R: 0.7 a,r
- Compressor Inducer Diameter: 61.5
- Compressor Trim: 56.9
- Compressor wheel: Billet Compressor wheel
- Compressor wheel/blades: Radom Colour
- Cooling Type: Water + Oil Cooling
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet Flange: 4 bolt
- Features: Individual
- Finish: Matte
- Horse Power: Up to 600HP
- Interchange Part Number: for all 4/6 cylinder and 2.5L-6.0L engines
- Manufacturer Part Number: RWTLU7
- Manufacturer Warranty: 2 Years
- Maximum PSI: 22
- Note: No Instruction Included
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Reference OE/OEM Number: GT35 gt3582 , for all 4/6 cylinder and 2.5L-6.0L, GT3582R anti-surge ,anti surge, street type turbo, turbocompressor turbocharger, turbo charger turbolader, Billet Compressor Wheel Turbo
- Steel Turbine Wheel: K419 alloy,resistance up to 1000℃
- Superseded Part Number: Billet Compressor Wheel
- Thrust bearing: 270 degree
- Turbine Exducer Diameter: 62.4
- Turbine housing: temperature resistant up to 850℃
- Turbine Housing A/R: 0.63 A,R
- Turbine Inducer Diameter: 68
- Turbine Trim: 84.2
- Type: Turbocharger
- Universal Fitment: Yes
- Warranty: 2 Year
- Wastegate: External Wastegate