T3 GT3582 GT35 A/R 0.63 0.7 Anti Surge 4 Water+Oil Cold Turbo Billet Wheel
T3 GT3582 GT35 A/R 0. 63 0.7 Anti Surge 4 Water+Oil Cold Turbo Billet Wheel. Street Billet Compressor Wheel GT3582 Universal Replacement Turbocharger. This turbo is an universal application street turbo, some modification may be required based on individual vehicle. Please check the details carefully before purchasing. Perfect for all 4/6 cylinder and 2.5L-6.0L engines Capable of Boosting Horse Power up to 600HP. Notice:Please confirm that there is enough space in your car to install this turbo before purchasing. Turbine Side: Exhaust Inlet Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Side: Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Compress Inlet Size(Air intake): 4 inch (103.5mm) Compressor Outlet Size: 2.5 inch (63.6mm). Bearing Type: Wet Float Thrust bearing: 270 degree Cooling Type: Water + Oil Cooling Horse Power: Up to 600HP Turbo Type: Individual Universal Fitment: Yes Finish: Matte Wastegate: W/O Wastegate Oil feed/inlet: M107/16-24 Oil drian/outlet: M14.1 & 2M81.25 Water inlet/outlet: M14 1.5 Maximum PSI: 22 Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Pakage Size: 26 x 25 x 23 cm Pakage Weight: 8350g.
Turbine housing: Silicon-Molybdenum - temperature resistant up to 850? Steel Turbine Wheel: K419 alloy - high oxidation stability and resistance up to 1000? Compressor housing: ZL104 aluminum with lightweight 4. Billet Compressor wheel: forged full-machined billet aluminum compressor wheels with a larger horsepower range and better boost response.
Increase 20-40% power for your car 2. Excellent high temperature resistance, high efficiency and durability 3. Rich experience in turbo production and own factory 4. High-Speed oil seal ring and Precision clearance. 100% balancing Test by TURBOTECHNICS VSR3 2.
G3-min-Flow VNT Turbo testing 3. Make sure the oil drain line is lower than the turbo itself.
Gasoline car must install a water cooling device to avoid overheating. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Other items you might also like. TURBOCHARGER TURBO for VAUXHALL FIAT Corsa Punto 1.3 JTD CDTI KP35 54359880005. GT1544 turbo charger for Ford Transit MK5 Focus I 1.8TDCI 66 kW 90 HP BHDB/C9DB. GT2052V TURBO Chra for Audi A6 2.5 TDI C5 2496 ccm AFB/AKN 150HP Cartridge. 5 a/r TURBO T3 T4 exhaust inlet flange 800hp. Turbo Charger For Chevrolet W3500 W4500 W5500 4.8l Diesel Turbocharged 700716. Turbocharger for Iveco Daily 2.5 D 116hp 53149887004 4841844 4 Cyl 1988. Turbocharger for Fiat Ducato for Iveco Daily for Renault Master 2.8 99460981. Turbine fit for Nissan Primera 2.2 DCI 126HP 93KW YD22DDTI Turbocharger. Will this fit my car? When will my order be dispatched? What do I do if I have not received my order?
Please make sure you have read through the whole listing and paid attention to "note" and "notice". Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. The message response might be delayed on Weekend, but we promise a response within 12 hours.
Opening Hours:7 x 24. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts".
The seller is "carsloyalpartner" and is located in this country: GB. This item can be shipped worldwide.
- Application: for all 4/6 cylinder and 2.5L-6.0L engines
- bearing type: journal bearing, wet bearing
- Billet ompressor wheel: forged full-machined billet aluminum compressor wheels, with a larger horsepower range and better boost response
- Brand: maXpeedingrods
- Compressor Exducer Diameter: 81.5
- Compressor housing: ZL104 aluminum with lightweight
- Compressor housing A/R: 0.7 a,r
- Compressor Inducer Diameter: 61.5
- Compressor Trim: 56.9
- Compressor wheel: Billet Compressor wheel
- Compressor wheel/blades: Radom Colour
- Cooling Type: Water + Oil Cooling
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet Flange: 4 bolt
- Features: Individual
- Finish: Matte
- Horse Power: Up to 600HP
- Interchange Part Number: for all 4/6 cylinder and 2.5L-6.0L engines
- Manufacturer Part Number: L2SI13
- Manufacturer Warranty: 2 Years
- Maximum PSI: 22
- Oil drian/outlet: M14.1 & 2*M8*1.25
- Oil feed/inlet: M10*7/16-24
- Reference OE/OEM Number: GT35 gt3582 , for all 4/6 cylinder and 2.5L-6.0L, GT3582R anti-surge ,anti surge, street type turbo, turbocompressor turbocharger, turbo charger turbolader, Billet Compressor Wheel Turbo
- Steel Turbine Wheel: K419 alloy,resistance up to 1000℃
- Superseded Part Number: Billet Compressor Wheel
- Thrust bearing: 270 degree
- Turbine Exducer Diameter: 62.4
- Turbine housing: temperature resistant up to 850℃
- Turbine Housing A/R: 0.63 A,R
- Turbine Inducer Diameter: 68
- Turbine Trim: 84.2
- Type: Turbocharger
- Universal Fitment: Yes
- Water: M14* 1.5
- Feature: ESCP
- EAN: 6971362682576