T3 GT3582 GT35 A/R 0.63 0.7 Anti Surge 4 Water+Oil Cold Turbo Turbocharger
T3 GT3582 GT35 A/R 0. 63 0.7 Anti Surge 4 Water+Oil Cold Turbo Turbocharger. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model.
1 xTurbocharger 2 x Flange gaskets 2 x Oil feed/drain gaskets. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor housing: ZL104 aluminum 4. Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5.Max HP: UP to 600hp. Turbine housing : Ductile iron QT450-10 - temperature resistant up to 700? Steel turbine wheel: K418 alloy - high oxidation stability and resistance up to 900? Compressor housing: ZL104 aluminum with lightweight 4. Compressor wheel/blades: Cast aluminium blades - superior air tightness & corrosion resistance. Cost-effective turbo increase 20-40% power for your car 2. Rich experience in turbo production and own factory 3. High-Speed oil seal ring and Precision clearance 4. Built for durability and strength. 100% balancing Test by TURBOTECHNICS VSR3 2.
G3-min-Flow VNT Turbo testing 3. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil.After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle.
Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively.
Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped. Then, the updated result will be informed.
Will this fit my car? Please make sure you have read through the whole listing and paid attention to "note" and "notice". When will my order be dispatched?
Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you couldprovide us some pictures or video to illustrate the issue details.Other items you might also like. Short shifter For Nissan Skyline R33 GTR GTS-T GTS 5 speed Short Throw Shifter. FRONT LOWER CONTROL ARM For NISSAN S13 Adj. Turbo for Nissan Skyline R32 R34 2.0L 2.5L RB20DET RB25DET Turbocharger a. Height Adjustable Coilover Coilovers For Nissan Skyline GTST R33 ECR33 ER33 AMM. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "crazymanengine" and is located in this country: GB. This item can be shipped worldwide.
- Brand: maXpeedingrods
- Type: Turbocharger
- Features: Individual
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582, GT3582R anti-surge anti surge Turbine, turbo charger turbolader, turbocompressor turbocharger, High performance aftremarket parts, GT35 GT3582 Turbo Turbocharger
- Universal Fitment: Yes
- Finish: Matte
- Manufacturer Warranty: 2 Years
- Superseded Part Number: GT3582
- shipping time to UK notice: 2-4 b. from UK
- Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- Warranty: 2 Year
- Cooling Type: Water & Oil cooled
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Compressor housing A/R: 0.7 A/R
- Turbine Housing A/R: 0.63 A/R
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Dimensions (Length Width Height): 230*180*240 mm
- bearing type: journal bearing, wet bearing
- Note: No Instruction Included
- Important Notice: Package Included: Just like the picture, Professional installation required
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Maximum PSI: 22
- Exhaust Outlet Flange: 4 bolt
- Manufacturer Part Number: ICRA04
- EAN: 6941324411292