T3 GT3582 GT35 A/R 0.63 0.7 Anti-Surge Turbo Turbocharger water cool 600HP
Guaranteed Fitment Always the correct part. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power. Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil WastegateExternal Wastegate.
Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor housing: ZL104 aluminum 4.
Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3. High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4. Durable: Water-cooled/oil-cooled structure extends turbine service life 5. 100% BALANCING TEST: This Turbocharger you will receive has been balanced using the VSR machine technology. Rich Experience In Turbo Production And Own Factory 2. High-Speed Oil Seal Ring 5. Improve Emissions & Save Oil. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately.Turbocharger for Peugeot 207 308 3008 1.6 THP Turbo 150hp156 BHP 2004 2005 2006. 700447 Turbocharger for BMW 320D Touring E46 100 KW 136 CV GT1549V Turbo sale. TURBO CARTRIDGE CHRA CORE for ALFA ROMEO 147 156 GT 1.9 JTD 55191934 716665.
Turbocharger 721021 for AUDI A3 1.9 TDI 150HP 1998- turbine + manifold gasket. Turbo Chra Cartridge for Seat Altea / Leon / Toledo MK III 2.0 TDI 136HP BKD/AZV. Turbocharger Cartridge for Land-Rover Defender 2.4DCI 140HP 6C1Q6K682EF. Turbocharger for Mitsubishi Triton L200 2.5 DID 4D56 165HP KB4T VT16 turbo. The item "T3 GT3582 GT35 A/R 0.63 0.7 Anti-Surge Turbo Turbocharger water cool 600HP" is in sale since Tuesday, December 28, 2021.This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "exquisitemotorparts" and is located in Leicester. This item can be shipped worldwide.
- Brand: BFO
- Type: Turbocharger
- Features: Individual
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582
- Classic Car Part: Yes
- Manufacturer Warranty: 2 Years
- Superseded Part Number: GT3582
- Universal Fitment: Yes
- shipping time to UK notice: 2-4 b. from UK
- Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- Warranty: 2 Year
- Cooling Type: Water & Oil cooled
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Compressor housing A/R: 0.7 A/R
- Turbine Housing A/R: 0.63 A/R
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Dimensions (Length Width Height): 230*180*240 mm
- bearing type: journal bearing, wet bearing
- Note: No Instruction Included
- Important Notice: Package Included: Just like the picture
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain
- Maximum PSI: 22
- Exhaust Outlet Flange: 4 bolt
- Manufacturer Part Number: 4HCWJG