T3 GT3582 GT35 type A/R 0.63 0.7 Anti Surge Turbocharger Uversal for 3.0-6.0L
Guaranteed Fitment Always the correct part. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power. Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil WastegateExternal Wastegate. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3.
Compressor housing: ZL104 aluminum 4. Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5.Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3. High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4. Durable: Water-cooled/oil-cooled structure extends turbine service life 5. 100% BALANCING TEST: This Turbocharger you will receive has been balanced using the VSR machine technology.
We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage.
Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil.
To protect the turbochager and your car engine, Air filter is necessary. Professional installation is highly recommended No Instruction Included. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please check the specifications and verify compatibility prior to placing your order.Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. Then, he updated result will be informed. Will this fit my car? Please make sure you have read through the whole listing and paid attention to note and notice.
When will my order be dispatched? Can I amend my order? What do I do if my product is faulty?It will speed up the process if you could provide us some pictures or video to illustrate the issue details. What do I do if I have not received my order? OTHER ITEMS YOU MIGHT ALSO LIKE. 6pcs Ignition Coil Pack Replacement for Skyline R33 SERIES 2 RB25 RB25DET. RB25DET RB25 Coilover Coilover Shock Struts 1995 FOR Nissan Skyline GTST R33 New. Alloy Front Mount Intercooler Set For Nissan Skyline R32 R33 R34 2.0 2.5 89-02. 4340 Steel Crank Crankshaft for Nissan Skyline GTR R32 R33 R34 RB25 RB26 1800HP. The item "T3 GT3582 GT35 type A/R 0.63 0.7 Anti Surge Turbocharger Uversal for 3.0-6.0L" is in sale since Friday, October 15, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts".
- shipping time to UK notice: 2-4 b. from UK
- Brand: maXpeedingrods
- Manufacturer Part Number: FJCRA5
- Type: Turbocharger
- Features: Individual
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582
- Manufacturer Warranty: 2 Years
- Superseded Part Number: GT3582
- Universal Fitment: Yes
- Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- Warranty: 2 Year
- Cooling Type: Water & Oil cooled
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Compressor housing A/R: 0.7 A/R
- Turbine Housing A/R: 0.63 A/R
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Dimensions (Length Width Height): 230*180*240 mm
- bearing type: journal bearing, wet bearing
- Note: No Instruction Included
- Important Notice: Package Included: Just like the picture
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain
- Maximum PSI: 22
- Exhaust Outlet Flange: 4 bolt