T3 GT3582 GT35 Universal A/R 0.7.63 Anti-Surge TURBO Turbocharger for 2.5-6.0L

Perfect for all 4/6 cylinder and 2.5L-6.0L engines. Capable of Boosting Horse Power up to 600HP. Please confirm that there is enough space in your car to install this turbo before purchasing. Lack of oil will cause the turbocharger shaftplay and damage, please adjust the oil pressure and ensure that the turbocharger is fully lubricated. Exhaust Inlet Flange: T3 Flange.

Turbine Exducer Diameter: 62.4mm. Compressor Inducer Diameter: 61.5mm. Compressor Exducer Diameter: 81.5mm. Compress Inlet Size(Air intake): 4 inch (103.5mm). Compressor Outlet Size: 2.5 inch (63.6mm). Cooling Type: Water + Oil Cooling. Horse Power: Up to 600HP. Water inlet/outlet: M14 1.5. Accessories: You will get exactly as shown as picture above.

Pakage Size: 26 x 25 x 23 cm. Turbine housing :Ductile iron QT450-10 - temperature resistant up to 700?

Steel turbine wheel:K418 alloy - high oxidation stability and resistance up to 900? Compressor housing:ZL104 aluminum with lightweight. Compressor wheel/blades:Cast aluminium blades - superior air tightness & corrosion resistance. Cost-effective turbo increase 20-40% power for your car.

Rich experience in turbo production and own factory. High-Speed oil seal ring and Precision clearance. Built for durability and strength. 100% balancing Test by TURBOTECHNICS VSR3.

Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating. Ensure exhaust outlet are well sealed by welding.

The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e.

Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts".

The seller is "tomar_729164" and is located in this country: GB. This item can be shipped to United Kingdom.

Turbine Housing A/R: 0.63 A/R
Compressor Air Inlet: 4 inch (103.5mm)
Compressor Air Outlet: 2.5 inch (63.6mm)
Maximum PSI: 22
Cooling Type: Water & Oil cooled
Horse Power: Capable of Boosting Horse Power up to 600HP
Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, It's aftermarket replcement part
Manufacturer Warranty: 2 Years
Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
Compressor housing A/R: 0.7 A/R
Features: Individual
Finish: Matte
Dimensions (Length Width Height): 230*180*240 mm
bearing type: journal bearing, wet bearing
Warranty: 2 Year
Manufacturer Part Number: F5Z79J
Superseded Part Number: GT3582
Exhaust Outlet Flange: 4 bolt
Reference OE/OEM Number: GT35 gt3582, GT3582 anti-surge anti surge Turbine, turbo charger turbolader, turbocompressor turbocharger, High performance aftremarket parts, GT35 GT3582 Turbo Turbocharger
Brand: MaXpeedingRods
Type: Turbocharger
Interchange Part Number: for all 4/6 cyl ,2.5L-6.0L engines
Note: No Instruction Included
Universal Fitment: Yes
Application: Perfect for all 4/6 cylinder and 2.5L-6.0L engines
EAN: 6941503355379