Turbo charger Turbolader GT3582 GT35 Oil Fuel Drain Return Feed Line 10 AN

  

Guaranteed Fitment Always the correct part. GT35 GT3582 Universal Turbocharger for 3.0L-6.0L Engine Water-Oil Cooler+Oil Drain Return Feed Line Kit.

\Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil Wastegate:External Wastegate. Turbo Oil Return / Feeding Line Kit. Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan.

The kit provides a anodized look, and gives a best cooling performance on your turbo and long lasting life. Turbo Oil returen /Feeding line kit: Stainless Steel Braided Includes complete install kit It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look gives a best cooling performance on your turbo and long lasting life. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3.

Compressor housing: ZL104 aluminum 4. Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Excellent Design: Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance 2. High Temperature Resistance: special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900° 3. High Efficiency: High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag 4. Durable: Water-cooled/oil-cooled structure extends turbine service life 5. 100% BALANCING TEST:This Turbocharger you will receive has been balanced using the VSR machine technology. Improve Emissions & Save Oil. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil.

Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating.

Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Authorization Number before returning any part.

Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. Then, he updated result will be informed.

OTHER ITEMS YOU MIGHT ALSO LIKE. Turbocharger for Hyundai H-1 Starex 2.5 Hyundai I800 16V 125kw + Gaskets. Turbocharger for Audi A4 2.0i TFSi Quattro (B7)BGB/BWE 05 -08 53039880106 new. T3 GT3582 GT30 compresor A/R 0. 63 Anti-Surge housing R33 TURBO Turbocharger. Turbo Core for Nissan Navara D40 Pathfinder 14411-EB300 751243 GT2056V YD25DDTI. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "driveyoucrazyparts" and is located in this country: GB. This item can be shipped to United Kingdom.

• Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
• bearing type: journal bearing, wet bearing
• Brand: maXpeedingrods
• Compressor Air Inlet: 4 inch (103.5mm)
• Compressor Air Outlet: 2.5 inch (63.6mm)
• Compressor housing A/R: 0.7 A/R
• Cooling Type: Water & Oil cooled
• Dimensions (Length Width Height): 230*180*240 mm
• Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
• Exhaust Outlet Flange: 4 bolt
• Horse Power: Capable of Boosting Horse Power up to 600HP
• Important Notice: Package Included: Just like the picture, Professional installation required
• Interchange Part Number: GT3582 Turbocharger
• Manufacturer Part Number: RDC5KP
• Manufacturer Warranty: 2 Years
• Maximum PSI: 22
• Notice: NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
• Reference OE/OEM Number: GT35 Turbo, gt3582 , Universal, anti-surge , anti surge, turbo charger, turbolader, Oil Fuel Drain Return Feed Line, turbocompressor , turbocharger, Water + Oil Cooler, Oil Return , Feeding Line
• Turbine Housing A/R: 0.63 A/R
• Type: Turbocharger
• Universal Fitment: Yes