Turbo charger Turbolader GT3582 GT35 Oil Fuel Drain Return Feed Line 10 AN
Guaranteed Fitment Always the correct part. GT35 GT3582 Universal Turbocharger for 3.0L-6.0L Engine Water-Oil Cooler+Oil Drain Return Feed Line Kit.\Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil Wastegate:External Wastegate. Turbo Oil Return / Feeding Line Kit. Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, and gives a best cooling performance on your turbo and long lasting life. Turbo Oil returen /Feeding line kit: Stainless Steel Braided Includes complete install kit It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look gives a best cooling performance on your turbo and long lasting life. Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor housing: ZL104 aluminum 4. Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5.
Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating.
Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific.
It will speed up the process if you could provide us some pictures or video to illustrate the issue details. What do I do if I have not received my order? OTHER ITEMS YOU MIGHT ALSO LIKE.Turbocharger Chra for Toyota Hilux 2.5L D 2KD-FTV 2001 1720130030 1720130120. GGT2256V Cartridge for BMW X5 3.0 D (E53) 3.0L D M57 11652248834 Turbo Chra Core. GT45 Universal Turbo Turbocharger A/R 1.05 600+ BHP w/ Oil Feed Drain Lines. Turbocharger Cartridge For Fiat Croma Jtd, Stilo Jtd With Z19dt Engine 93183681. RHF55 VF52 for Subaru Legacy Impreza 14411AA800 Turbo charger cartridge CHRA. Turbocharger Gt2260v Cartridge For Bmw 530d 730d M57n 218hp 725364 725364-2. TD025M Turbocharger Chra Cartridge for Opel Combo-C 1.7 CDTI Y17DT(L) 4917306501. Gt1549s Turbo Chra Cartridge For Renault Laguna Ii 1.9 Dci F9q 2000 - Mw31216381. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "driveyoucrazyparts" and is located in this country: GB. This item can be shipped to United Kingdom.
- Application: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- bearing type: journal bearing, wet bearing
- Brand: maXpeedingrods
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Compressor housing A/R: 0.7 A/R
- Cooling Type: Water & Oil cooled
- Dimensions (Length Width Height): 230*180*240 mm
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet Flange: 4 bolt
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Important Notice: Package Included: Just like the picture, Professional installation required
- Interchange Part Number: GT3582 Turbocharger
- Manufacturer Part Number: TRYFB7
- Manufacturer Warranty: 2 Years
- Maximum PSI: 22
- Notice: NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Reference OE/OEM Number: GT35 Turbo, gt3582 , Universal, anti-surge , anti surge, turbo charger, turbolader, Oil Fuel Drain Return Feed Line, turbocompressor , turbocharger, Water + Oil Cooler, Oil Return , Feeding Line
- Turbine Housing A/R: 0.63 A/R
- Type: Turbocharger
- Universal Fitment: Yes