Turbo Manifold Kit for Nissan Safari Patrol 4.2L TD42 Diesel GR GQ Y60 800HP new
Turbo Manifold Kit for Nissan Safari Patrol 4.2L TD42 Diesel GR GQ Y60 800HP new. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Turbo Turbocharger & Exhaust Manifold Kit For Nissan Patrol 4.2L TD42 GQ Y60. Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model.
Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power. For Nissan Safari / Patrol 4.2L TD42 TB42, TB45, TD45.
Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP. Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet (Downpipe) Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil WastegateExternal Wastegate.
IncludeTurbo Turbocharger & Exhaust Manifold Kit same as picture. Mount Type: top mount / high mount.You can plate it off if intending to use internally wastegated Turbo (The blocking plate is included as shown in the picture). Turbine housing Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine WheelMade from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3.
Compressor wheel/bladesCast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp.
Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. To protect the turbochager and your car engine, Air filter is necessary.Professional installation is highly recommended (No Instruction Included) This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please check the specifications and verify compatibility prior to placing your order.
Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. Then, he updated result will be informed. Will this fit my car?
Please make sure you have read through the whole listing and paid attention to note and notice. When will my order be dispatched? Can I amend my order? What do I do if my product is faulty?
Con Rods for Toyota Harrier Turbo XU60 Lexus NX AGZ10/15 IS XE30 2.0L 8AR-FTS I4. The item "Turbo Manifold Kit for Nissan Safari Patrol 4.2L TD42 Diesel GR GQ Y60 800HP new" is in sale since Friday, September 10, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Turbochargers & Parts". The seller is "fitnesskeepingmall" and is located in Dorsey. This item can be shipped worldwide.
- Brand: maXpeedingrods
- Manufacturer Part Number: RDIXQG
- Type: High performance aftremarket parts
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582
- Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- shipping time to UK notice: 2-4 b. from UK
- Application: GT35 GT3582 Turbo Turbocharger
- Warranty: 2 Year
- Cooling Type: Water & Oil cooled
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet (Downpipe) Flange: 4 bolt
- Compressor housing A/R: 0.7 A/R
- Turbine Housing A/R: 0.63 A/R
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Dimensions (Length Width Height): 230*180*240 mm
- bearing type: journal bearing, wet bearing
- Note: No Instruction Included
- Important Notice: Package Included: Just like the picture
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain
- Maximum PSI: 22