Turbo manifold Kit GT3582 GT35 GTX3582R GT35R GTX3582 Journal Bearing Balanced
Turbo manifold Kit GT3582 GT35 GTX3582R GT35R GTX3582 Journal Bearing Balanced. Lowest Price Price match guarantee.
Guaranteed Fitment Always the correct part. Turbo Turbocharger & Exhaust Manifold Kit For Nissan Patrol 4.2L TD42 GQ Y60. Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power.
For Nissan Safari / Patrol 4.2L TD42 TB42, TB45, TD45. Perfect for all 4/6 cylinder and 3.0L-6.0L engines Horse Power: Capable of Boosting Horse Power up to 600HP.Exhaust Inlet (Turbo Manifold) Flange: T3 Flange Exhaust Outlet (Downpipe) Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Bearing Type: Wet Float Cooling Type: Water + Oil WastegateExternal Wastegate. IncludeTurbo Turbocharger & Exhaust Manifold Kit same as picture. Mount Type: top mount / high mount. You can plate it off if intending to use internally wastegated Turbo (The blocking plate is included as shown in the picture). Turbine housing Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine WheelMade from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor wheel/bladesCast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp.
Rich Experience In Turbo Production And Own Factory 2. High-Speed Oil Seal Ring 5. Improve Emissions & Save Oil. We highly recommend you make sure the points below before installing: 1.Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil.
After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. To protect the turbochager and your car engine, Air filter is necessary. Professional installation is highly recommended (No Instruction Included) This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please check the specifications and verify compatibility prior to placing your order.
GT30 GT3037 UNIVERSAL application turbo kit with oil hoses fittings T3 Flange. RHF4V Turbocharger for Mazda 6 Citd J25S MPV II DI 2.0L Turbolader VJ32. Turbo Turbocharger for Audi A4 2.0T B7 BUL BWE BWT K03 2005 2007 2008 Fine. K0422-582 Turbo Turbolader fit Mazda CX7 CX-7 2.3L K04 2006 2007 2008 2009. Turbo 53039700145 for Hyundai H-1 Starex 2.5 Hyundai I800 16V 125kw exhaust.Turbo FOR Renault Laguna Espace Megane 1.9 dCi 708639 8200256077 F9Q ENGINE. Turbocharger for FORD FOCUS TURBO 1.6 DIESEL HDi DV6 ENGINE 90PS superchargers. Turbocharger for Shibaura Industriemotor 32 HP AS12 2.2 N844L-T turbine + gasket. K04 Turbo for AUDI S3 1.8t 210PS 154KW APY/AMK 53049700022. GT30 GT3037 GT3071R GT3076 Turbo charger Floating Wet Bearing Turbocharger.
- Brand: maXpeedingrods
- Manufacturer Part Number: 42MFVN
- Type: High performance aftremarket parts
- Reference OE/OEM Number: GT35 gt3582 GT35R GTX3582
- Other Part Number: Perfect for all 4/6 cylinder and 3.0L-6.0L engines
- shipping time to UK notice: 2-4 b. from UK
- Application: GT35 GT3582 Turbo Turbocharger
- Warranty: 2 Year
- Cooling Type: Water & Oil cooled
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Exhaust Outlet (Downpipe) Flange: 4 bolt
- Compressor housing A/R: 0.7 A/R
- Turbine Housing A/R: 0.63 A/R
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Dimensions (Length Width Height): 230*180*240 mm
- bearing type: journal bearing, wet bearing
- Note: No Instruction Included
- Important Notice: Package Included: Just like the picture
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain
- Maximum PSI: 22