Turbocharger Turbolader GT3582 GT35 AR 0.70 AR 0.63 Anti Surge T3 GT30 Turbo
Turbine Side: Exhaust Inlet Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Side: Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Compress Inlet Size(Air intake): 4 inch (103.5mm) Compressor Outlet Size: 2.5 inch (63.6mm). Bearing Type: Floating/Journal Bearing Thrust bearing: 270 degree Cooling Type: Water + Oil Cooling Horse Power: Up to 600HP Turbo Type: Individual Wastegate:External Wastegate Oil feed/inlet: M107/16-24 Oil drian/outlet: 2M81.25 Water inlet/outlet: M14 1.5 Maximum PSI: 22 Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Pakage Size: 26 x 25 x 23 cm Pakage Weight: 8350g. 1 xTurbocharger 2 x Flange gaskets 2 x Oil feed/drain gaskets.Turbine housing : Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius 3. Compressor housing: ZL104 aluminum 4.
Compressor wheel/blades: Cast aluminium with good gas tightness and corrosion resistance 5. Max HP: UP to 600hp. Turbine housing : Ductile iron QT450-10 - temperature resistant up to 700?Steel turbine wheel: K418 alloy - high oxidation stability and resistance up to 900? Compressor housing: ZL104 aluminum with lightweight 4. Compressor wheel/blades: Cast aluminium blades - superior air tightness & corrosion resistance. Cost-effective turbo increase 20-40% power for your car 2.
Rich experience in turbo production and own factory 3. High-Speed oil seal ring and Precision clearance 4.Built for durability and strength. 100% balancing Test by TURBOTECHNICS VSR3 2. G3-min-Flow VNT Turbo testing 3. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3.
OTHER ITEMS YOU MIGHT ALSO LIKE. GT1752 CT17 Turbo Turbocharger for Nissan Patrol GR RD28Ti 2.8L 14411-VB300. Ignition Coil Pack Set Fit Nissan 200SX / Silvia S15 X-Trail GT PNT30 SR20VET. GT2056V 767720 76970 For NISSAN D40 Navara Pathfinder YD25 2.5L Turbo Cartridge. GT2052LS Turbo for Rover 75 MG R75 ZT 1.8 765472 731320 Turbocharger Cartridge.Turbocharger for Audi VW Seat Skoda 1,9 TDI ALH AHF AJM AUY 03G253014E Turbine. Turbocharger Turbo Fit for Audi S3 1.8L 1.8 L TT Quattro K04 023 53049700023. Turbo Turbocharger for Toyota Land Cruiser 4 Runner 3.0L 1KZ-T 1KZ-TE CT12B 1996. K03 F23L TurboCharger for Audi A4 2.0 TFSI (B7) 8ED 8EC Fine 53039880106.
Turbo charger with gasket for Subaru Impreza 2.5 AWD WRX TD004L TOP QUALITY. Turbocharger CHRA for Audi A3 / Seat Ibiza MK II, Leon 150 HP 110 KW 1.9tdi AR. Turbo Cartridge for Mini Cooper S R55 R56 R57 Peugeot RCZ 1.6L 135 KW 128KW new.Turbo Core For VW Caddy III Golf V Touran Jetta V Passat B6 1.9TDI BJB BKC BXE. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "wowperformance" and is located in this country: GB. This item can be shipped to United Kingdom.
- shipping time to UK notice: 2-4 b.from UK
- Brand: maXpeedingrods
- Manufacturer Part Number: IA96DK
- Type: Turbocharger
- Features: Individual
- Reference OE/OEM Number: GT35 gt3582, GT3582 anti-surge anti surge Turbine, turbo charger turbolader, turbocompressor turbocharger, High performance aftremarket parts, GT35 GT3582 Turbo Turbocharger
- Manufacturer Warranty: 2 Years
- Universal Fitment: Yes
- Finish: Matte
- Interchange Part Number: for all 4/6 cyl ,2.5L-6.0L engines
- Superseded Part Number: GT3582
- Application: Perfect for all 4/6 cylinder and 2.5L-6.0L engines
- Warranty: 2 Year
- Cooling Type: Water & Oil cooled
- Horse Power: Capable of Boosting Horse Power up to 600HP
- Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
- Compressor housing A/R: 0.7 A/R
- Turbine Housing A/R: 0.63 A/R
- Compressor Air Inlet: 4 inch (103.5mm)
- Compressor Air Outlet: 2.5 inch (63.6mm)
- Dimensions (Length Width Height): 230*180*240 mm
- bearing type: journal bearing, wet bearing
- Note: No Instruction Included
- Important Notice: Package Included: Just like the picture, Professional installation required
- Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It's aftermarket replcement part
- Maximum PSI: 22
- Exhaust Outlet Flange: 4 bolt
- EAN: 6941324411292